manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

Share
Download
Rohde & Schwarz ZNB20 User Manual Download Page 174

Concepts and Features

R&S

®

 ZNB/ZNBT

159

User Manual 1173.9163.02 ─ 38

However, all of the calibration units listed below can be used within their respective fre-
quency range.

The connector types of the calibration unit should be selected according the connec-
tors of the DUT.

Table 4-8: Rohde & Schwarz Calibration Units

Calibration unit

Frequency range

Connector type

No. of ports

Order no.

R&S ZN-Z51

100 kHz to 8.5 GHz

3.5 mm (f)

4

1319.5507.34

R&S ZN-Z51

100 kHz to 8.5 GHz

3.5 mm (f)

2

1319.5507.32

R&S ZN-Z51

100 kHz to 8.5 GHz

type N (f)

4

1319.5507.74

R&S ZN-Z51

100 kHz to 8.5 GHz

type N (f)

2

1319.5507.72

R&S ZN-Z51

custom configuration

The R&S ZN-Z51 allows a free/mixed port configuration with possible connector types N (m/f), 3.5 mm
(m/f), 7/16 (m/f) and 4.3-16 (f).

With an N(f)-type CalU serving as base unit, for each available port an alternative connector type N(m),
3.5 mm (m/f), 7/16 (m/f) or 4.3-16 (f) can be selected. For N(f)-type models alternative connectors can
be also be retrofitted, but the calibration unit has to be sent to service for that and has to be character-
ized again. See the data sheet for ordering information.

The frequency range for 7/16 connector ports is limited to 100 kHz to 7.5 GHz.

R&S ZN-Z103

2 MHz to 4 GHz

type N (f)

1

1321.1828.02

R&S ZN-Z151

100 kHz to 8.5 GHz

type N (f)

2

1317.9134.72

R&S ZN-Z151

100 kHz to 8.5 GHz

SMA (f)

2

1317.9134.32

Calibration

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands