Rohde & Schwarz ZNB20, User Manual

Page: 568 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
553 User Manual 1173.9163.02 ─ 38
Remote command:
MEMory:DEFine
Open Recall...
Loads an existing recall set from a file.
Opens the Open Dialog that allows to select the file from all VNA recall set files (
*.znx
) stored on the file system.
If the current setup includes External Switch Matrices and the recall set to be loaded
does not contain a switch matrix configuration, recalling the setup will be aborted. You
are requested to delete the configured RF connections (see
Chapter 5.19.5.5, "Switch
Matrix RF Connections Dialog" , on page 634) and to physically remove the switch
matrix from the RF paths.
If the recall set to be loaded contains a switch matrix configuration and no differences
to the current switch matrix configuration are detected, the recall set is loaded without
further enquiry. Otherwise you are asked whether or not you want to adapt the configu-
ration:
Select "Cancel" to abort the recall process or "OK" to open the Setup Recall Switch
Matrix Configuration Dialog that will guide you through the required configuration
changes.
Remote command:
MMEMory:LOAD:STATe
Save
Saves the active recall set to a file (
*.znx
) .
Displays the Save Dialog that allows you to specify a file name and location for the
recall set file.
Remote command:
MMEMory:STORe:STATe
File Softtool