GUI Reference
R&S
®
ZNB/ZNBT
297
User Manual 1173.9163.02 ─ 38
Figure 5-17: SMARTerCal (Cal Unit), Step 2: Connections
Related information
Refer to
Chapter 4.5.5.4, "Multiple Port Assignments"
on page 164 for details on multi-
ple port assignments
Cal Type / Ports
Displays the automatic calibration to be performed, identified by its calibration type and
calibrated ports.
Remote command:
The port parameters in many calibration commands define the calibrated ports.
Port Assignment (manual)
The "Connections" step allows to configure the assignment(s) between VNA ports and
calibration unit ports manually.
The R&S
ZNB/ZNBT always proposes an optimum solution (minimum number of
assignments) that additionally minimizes the physical port reconnections required
between calibration stages. For user-modified assignments it provides assistive infor-
mation indicating insufficient, or redundant entries.
The test port connectors are automatically set according to the connector type of the
selected calibration unit port.
Cal Softtool
