manualshive.com logo in svg

Rohde & Schwarz ZNB20, User Manual

The Rohde & Schwarz ZNB20 User Manual is an essential companion for users of this cutting-edge product. Packed with comprehensive instructions and helpful insights, this manual is available for free download from manualshive.com. Unlock the full potential of your ZNB20 with this user-friendly and informative resource.

Share
Download
background image

Command Reference

R&S

®

 ZNB/ZNBT

1030

User Manual 1173.9163.02 ─ 38

Option R&S

 

ZNB-B1, Bias Tees

If option R&S

 

ZNB-B1 is installed on a R&S

 

ZNB4 or R&S

 

ZNB8, the frequency range

starts at 100 kHz.
Bias Tees are 

not

 available for the R&S

 

ZNBT.

[SENSe<Ch>:]FREQuency[:CW]

................................................................................... 1030

[SENSe<Ch>:]FREQuency:FIXed

..................................................................................1030

[SENSe<Ch>:]FREQuency:CENTer

...............................................................................1031

[SENSe<Ch>:]FREQuency:CONVersion

........................................................................ 1032

[SENSe<Ch>:]FREQuency:CONVersion:ARBitrary

..........................................................1032

[SENSe<Ch>:]FREQuency:CONVersion:ARBitrary:PMETer<Pmtr>

.................................. 1032

[SENSe<Ch>:]FREQuency:CONVersion:GAIN:LMCorrection

........................................... 1033

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:FIXed<Stg>

.............................................1034

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:FUNDamental

......................................... 1034

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:IFPort

..................................................... 1035

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:LOMultiplier<Stg>

....................................1035

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:LOPort<Stg>

........................................... 1035

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:MFFixed

................................................. 1036

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:RFMultiplier

.............................................1037

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:RFPort

....................................................1038

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:STAGes

..................................................1038

[SENSe<Ch>:]FREQuency:CONVersion:MIXer:TFRequency<Stg>

...................................1038

[SENSe<Ch>:]FREQuency:IMODulation:CONVersion

..................................................... 1039

[SENSe<Ch>:]FREQuency:IMODulation:LTONe

............................................................. 1039

[SENSe<Ch>:]FREQuency:IMODulation:ORDer<Im>[:STATe]

......................................... 1040

[SENSe<Ch>:]FREQuency:IMODulation:RECeiver

..........................................................1040

[SENSe<Ch>:]FREQuency:IMODulation:SPECtrum:MORDer

...........................................1041

[SENSe<Ch>:]FREQuency:IMODulation:SPECtrum[:STATe]

........................................... 1041

[SENSe<Ch>:]FREQuency:IMODulation:TDIStance

........................................................ 1042

[SENSe<Ch>:]FREQuency:IMODulation:UTONe

.............................................................1043

[SENSe<Ch>:]FREQuency:SBANd

................................................................................1043

[SENSe<Ch>:]FREQuency:SEGMent:AXIS

.................................................................... 1044

[SENSe<Ch>:]FREQuency:SPAN

..................................................................................1045

[SENSe<Ch>:]FREQuency:STARt

.................................................................................1045

[SENSe<Ch>:]FREQuency:STOP

..................................................................................1045

[SENSe<Ch>:]FREQuency[:CW] 

<FixedFreq>

[SENSe<Ch>:]FREQuency:FIXed 

<FixedFreq>

Defines the fixed (Continuous Wave, CW) frequency for all sweep types operating at
fixed frequency ("Power", "Time", "CW Mode"). The two command forms

[SENSe<Ch>:]FREQuency[:CW]

 and 

[SENSe<Ch>:]FREQuency:FIXed

 are

equivalent.

This command also defines the center frequency of the intermodulation spectrum dia-
gram (option R&S

 

ZNB/ZNBT-K14). The frequency range depends on the R&S

 

ZNB/

ZNBT model; see 

Chapter 7.3.15.10, "[SENSe:]FREQuency..."

, 

on page 1029.

SCPI Command Reference

Summary of Contents for ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZNB20

Kawai ES100 Technical Speci? Cations preview
ES100
Brand: Kawai Pages: 5
Jata hogar 80 Instructions Manual preview
80
Brand: Jata hogar Pages: 12
Unior 270 A Operating Instructions preview
270 A
Brand: Unior Pages: 2
Vaisala HUMICAP HM70 User Manual preview
HUMICAP HM70
Brand: Vaisala Pages: 83
G-Tek 62 Series Operating Manual preview
62 Series
Brand: G-Tek Pages: 83
Didactum Monitoring System 500 II DC Quick Start Manual preview
Monitoring System 500 II DC
Brand: Didactum Pages: 2
YOSensi YO Meter Pulse User Manual preview
YO Meter Pulse
Brand: YOSensi Pages: 27
Autometers Systems A-400 Series Programming And Installation Brochure preview
A-400 Series
Brand: Autometers Systems Pages: 16
Clavia Nord C1 Service Manual preview
Nord C1
Brand: Clavia Pages: 13
BERTHOLD TECHNOLOGIES FlowStar2 LB 514 Operating Manual preview
FlowStar2 LB 514
Brand: BERTHOLD TECHNOLOGIES Pages: 130
Megger CFL535G Quick Start Manual preview
CFL535G
Brand: Megger Pages: 8
SEFRAM MW 3360 User Manual preview
MW 3360
Brand: SEFRAM Pages: 31
Allen Organ Company MDS-60 User Manual preview
MDS-60
Brand: Allen Organ Company Pages: 29
Keysight N5222-60118 Installation Note preview
N5222-60118
Brand: Keysight Pages: 42
wtw pH 3310 IDS Operating Manual preview
pH 3310 IDS
Brand: wtw Pages: 72
AlazarTech ATS9360 User Manual preview
ATS9360
Brand: AlazarTech Pages: 60
Kobold **C3 Series Operating Instructions Manual preview
**C3 Series
Brand: Kobold Pages: 12
CEM DT-25 Operating Instructions preview
DT-25
Brand: CEM Pages: 2

Brands by name

Popular brands

Load more brands