Concepts and Features
R&S
®
ZNB/ZNBT
192
User Manual 1173.9163.02 ─ 38
4.7 Optional Extensions and Accessories
The instrument can be upgraded with a number of hardware and software options, pro-
viding enhanced flexibility and an extended measurement functionality. The equipped
options are listed in the "Info" dialog (SYSTEM – SETUP > "Setup" > "Info...").
For a complete list of options, accessories, and extras refer to the product brochure or
to the "Options" section of the R&S
ZNB/ZNBT product pages on the internet.
The following sections provide an introduction to the software and hardware options
described in this documentation. The use of external power meters, generators and
switch matrices does not require any additional hardware or software options; it is
described at the end of the chapter.
4.7.1 Additional Test Ports (R&S
ZNBT only)
Various Options
The R&S
ZNBT8 is available with a minimum of 4 test ports (order number
1318.7006.24) that are either equipped with standard or with
reflectometers (option ZNBT8-B504).
The base unit can be extended by additional blocks of 4 ports, up to a maximum of 24
ports. Again, these additional port blocks can either be equipped with standard reflec-
tometers or with Extended Dynamic Range reflectometers. Mixed equipping is suppor-
ted.
Table 4-15: Additional Test Ports for R&S
ZNBT8
5 to 8
9 to 12
13 to 16
17 to 20
21 to 24
Standard Reflectometers
R&S
ZNBT8-
B108
R&S
ZNBT8-
B112
R&S
ZNBT8-
B116
R&S
ZNBT8-
B120
R&S
ZNBT8-
B124
Extended Dynamic Range
R&S
ZNBT8-
B508
R&S
ZNBT8-
B512
R&S
ZNBT8-
B516
R&S
ZNBT8-
B520
R&S
ZNBT8-
B524
The R&S
ZNBT20, on the other hand, is available with a minimum of 8 test ports (order
number 1332.9002.24). It can be extended with additional blocks of 4 ports, up to a
maximum of 24 ports. Extended Dynamic Range reflectometers are not available.
Optional Extensions and Accessories
