Concepts and Features
R&S
®
ZNB/ZNBT
122
User Manual 1173.9163.02 ─ 38
Example:
2 physical ports
: Reflection measurements on 1 balanced port
Bal.
port
Differential mode
Z
ref
= Z
0d
Common mode
Z
ref
= Z
0c
DUT
Balanced port:
Log.
VNA
port
3 physical ports
: Reflection and transmission measurements on 1 balanced port
Bal.
port
Differential mode
Z
ref
= Z
0d
Common mode
Z
ref
= Z
0c
DUT
Balanced port:
Log.
VNA
port
Single
ended
port
Single-ended
(unbalanced) port
Z
ref
= Z
connector
4 physical ports
: Reflection and transmission measurements on 1 or 2 balanced ports
Bal.
port
Differential mode
Z
ref
= Z
0d
Common mode
Z
ref
= Z
0c
DUT
Balanced port:
Log.
VNA
port
Single
ended
ports
Single-ended
(unbalanced) ports
Z
ref1
= Z
connector1
Z
ref2
= Z
connector2
Bal.
port
Differential mode
Z
ref
= Z
0d
Common mode
Z
ref
= Z
0c
DUT
Balanced port:
Log.
VNA
port
Bal.
port
Differential mode
Z
ref
= Z
0d
Common mode
Z
ref
= Z
0c
Balanced port:
Log.
VNA
port
A balanced port configuration is defined by simply selecting the pairs of physical ports
that shall be combined to form balanced ports and defining the two reference impedan-
ces for the differential and common mode at each balanced port. All this can be done
in a single "Balanced Ports" dialog. The most commonly used balanced port configura-
tions and impedances are predefined and can be selected in the "S-Parameter Wiz-
ard".
Depending on the test setup, the analyzer provides different types of mixed mode
parameters; refer to the following sections for details.
4.3.5.2
Mixed Mode Parameters
Mixed mode parameters are an extension of normal mode parameters (e.g. S-parame-
ters, impedances and admittances) for balanced measurements. The analyzer can
measure mixed mode parameters as soon as a balanced port configuration is selected.
Mixed mode parameters are used to distinguish the following three port modes:
●
s: Single-ended (for unbalanced ports)
●
d: Differential mode (for balanced ports)
Measurement Results
