Command Reference
R&S
®
ZNB/ZNBT
710
User Manual 1173.9163.02 ─ 38
Use
CALCulate<Chn>:EYE:MASK:SHAPe:BOTTom:STATe
or
to activate or deactivate the area in the eye mask.
The eye mask test is enabled/disabled using
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Offset>
Default unit: V
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:TYPE
<PolygonType>
Defines the shape of the center polygon (octagon, hexagon or rectangle) in the eye
mask of the related eye diagram.
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Use
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:STATe
to activate or deacti-
vate the area in the eye mask. The eye mask test is enabled/disabled using
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<PolygonType>
OCTogon | HEXagon | RECTangle
Options:
R&S
ZNB/ZNBT-K20
Manual operation:
See
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:HORizontal
<Main>[, <Minor>]
Defines the main [and minor] width of the center polygon in the mask of the related eye
diagram. The
depends on the selected polygon type (see
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:TYPE
This command will raise an execution error if the active trace in the selected channel is
not an eye diagram.
Use
CALCulate<Chn>:EYE:MASK:SHAPe:POLYgon:STATe
to activate or deacti-
vate the center polygon in the eye mask. The eye mask test is enabled/disabled using
.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Main>
Default unit: s
<Minor>
Default unit: s
SCPI Command Reference