GUI Reference
R&S
®
ZNB/ZNBT
636
User Manual 1173.9163.02 ─ 38
Select the required matrices and tap "OK" to add them to the RF connection configura-
tion or tap "Cancel" to quit the dialog without adding a switch matrix to the RF connec-
tion configuration
Note:
●
This dialog is shown automatically, in case no matrix has been added to the RF
connection configuration yet.
●
If the RF configuration configuration already contains all registered switch matrices,
the "Add" button is disabled.
Remote command:
n.a.
Delete
Opens the "Delete Switch Matrix" dialog:
Select some matrices and tap "OK" to remove them from the RF connection configura-
tion or tap "Cancel" to quit the dialog without removing a switch matrix from the RF
connection configuration.
Delete All
Opens a confirmation dialog
Setup Softtool
