GUI Reference
R&S
®
ZNB/ZNBT
483
User Manual 1173.9163.02 ─ 38
5.12.1.2
New Trace Dialog
The "New Trace" and "New Ch + Tr" tool bar buttons allow you to create a new trace
either in the active channel or a new one. The new trace can either be created in the
active diagram (tap/click the respective button), or in any existing or a new one (drag &
drop the button onto the diagram area).
After the button has been tapped/clicked or dropped, the "New Trace" dialog pops up
and allows you to select the S-Parameter for the new trace.
left = softkeys (up to 9 logical ports)
right = numeric input (10 or more logical ports)
5.12.1.3
Trace Manager Dialog
The "Trace Manager" dialog performs operations on traces.
Access:
TRACE – TRACE CONFIG > "Traces" > "Trace Manager..."
All existing traces of the current recall set are listed in a table with several editable
(white) or non-editable (gray) columns.
Table Area
The table contains the following columns:
●
"Name" indicates name of the related trace.
Trace names must be unambiguous across all channels and diagram areas in a
recall set.
●
"On" indicates and controls the visibility of the related trace.
Trace Config Softtool
