Rohde & Schwarz ZNB20, User Manual

Page: 960 / 1332

Command Reference
R&S
®
ZNB/ZNBT
945 User Manual 1173.9163.02 ─ 38
Note that the decimal separator and field separator must be different: if both are set to
comma, actually a semicolon will be used as field separator.
Setting parameters:
<TraceName> The name of the eye diagram whose results shall be exported
<TraceFile> Mandatory string parameter containing the path and file name of
the file. If the path is omitted, the current directory is used (see
MMEMory:CDIRectory
).
<DecSeparator> POINt | COMMa
Decimal separator
*RST:
COMMa
<FieldSeparator> SEMicolon | COMMa | TABulator | SPACe
Field separator
*RST:
SEMicolon
Usage: Setting only
Options: R&S ZNB/ZNBT-K20
Manual operation: See "Export Measurements..." on page 581
MMEMory:STORe:LIMit <TraceName>, <LimLineFile>
Saves the limit lines associated to a specified trace to a limit line file. Limit lines are
created using the
CALCulate<Chn>:LIMit...
commands.
Setting parameters:
<TraceName> Name of an existing trace in the active recall set (string parame-
ter) for which a limit line definition exists.
<LimLineFile> String parameter to specify the name and directory of the cre-
ated limit line file. The default extension (manual control) for limit
line files is *.limit, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
MMEMory:CDIRectory
Example: See
MMEMory:LOAD:LIMit
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 521
MMEMory:STORe:MARKer <AsciiFile>
Saves the values of all markers to an ASCII file.
SCPI Command Reference