GUI Reference
R&S
®
ZNB/ZNBT
633
User Manual 1173.9163.02 ─ 38
In the "Address of New Instrument" part, you can specify the required connection prop-
erties:
●
"Interface" selects the connection type; currently only "LAN" is available.
●
"Address" specifies the IP address or hostname of the external switch matrix.
If a connection can be established, the entries in the DRIVER FOR NEW
INSTRUMENT panel can be auto-detected: "Identify" sends an identification query
("IDN?") to the specified device address in order to get the type and serial number of
the connected switch matrix and to select the appropriate driver file.
Otherwise, manually select the "Driver". Matrix driver files (
*.matrix
) are stored in
the
Resources\ExtDev
subdirectory of the analyzer's program directory.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix<Matr>:DEFine
Delete All
Unregisters all switch matrices, automatically deleting all switch matrix RF connections.
Remote command:
SYSTem:COMMunicate:RDEVice:SMATrix:DELete
5.19.5.4
Device LAN Configuration Dialog
The "Device LAN Configuration" dialog allows to read and modify the "IP Configura-
tion" of an external device that is equipped with a LAN interface.
Access:
> "Configure"
Because the IP configuration is actually written to the device, the device must be
online
for the settings to be applied.
Setup Softtool
