Rohde & Schwarz ZNB20, User Manual

Page: 502 / 1332

GUI Reference
R&S
®
ZNB/ZNBT
487 User Manual 1173.9163.02 ─ 38
Data to <Destination>
Stores the current state of the active data trace to the Destination memory trace. No
trace functions are applied to the stored trace.
Tips:
●
Use Data & Func to <Destination> to apply trace functions to the stored trace.
●
You can also create memory traces using the Import Complex Data Dialog .
●
It is not possible to store Hold traces to memory.
●
For the relation between a data trace and its associated memory traces see "Cou-
pling of data and memory traces" on page 485.
Remote command:
CALCulate<Chn>:MATH:MEMorize
TRACe:COPY
Data & Func to <Destination>
Stores the current state of the active data trace to the Destination memory trace. Trace
functions are applied to the stored trace.
Trace functions
The trace functions comprise the following mathematical operations:
●
Active Trace Math functions
●
A shift of the data trace (see "Shift Trace" on page 507).
Data to <Destination> stores the raw trace without the trace functions, "Data & Func to
<Destination>" stores the trace after it has been transformed using the trace functions.
For the relation between a data trace and its associated memory traces see "Coupling
of data and memory traces" on page 485.
Remote command:
CALCulate<Chn>:MATH:MEMorize
Destination
Selects the destination for the Data to <Destination> and Data & Func to <Destination>
operations.
This can be one of the following:
●
An existing memory trace of the active data trace
The existing memory trace will be overwritten.
●
"New Trace"
The data are copied to a new memory trace, associated to the current data trace.
Remote command:
n/a
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Trace Config Softtool