Mixed signal option (MSO, R&S
RTO6-B1)
R&S
®
RTO6
988
User Manual 1801.6687.02 ─ 05
Remote command:
on page 2425 (all buses)
on page 2422 (bus1)
Hysteresis ← Advanced
Defines the size of the hysteresis for the respective channels.
"Normal"
The instrument sets a small value suitable for the signal and its set-
tings. Use this setting for clean signals.
"Maximum"
The instrument sets the maximum value that is possible and useful
for the signal and its settings. Use this setting for noisy signals.
"Robust"
Sets different hysteresis values for falling and rising edges to avoid
an undefined state of the trigger system. Use this setting for very
noisy signals.
Remote command:
on page 2426 (all buses)
on page 2422 (bus1)
Activate channels
Selects the state of the respective bus channel.
Enable/Disable D7-D0, D15-D18
The buttons select or deselect all digital channels of a pod at once.
14.1.1.2
Bus
Access: "Menu" > "Logic" > "Bus" tab
Digital channels and parallel buses
