R&S RTO6, User Manual

Page: 1145 / 2677

Power analysis (option R&S RTO6-K31)
R&S
®
RTO6
1145 User Manual 1801.6687.02 ─ 05
Maximum current
Sets the maximum expected current for the vertical scale. Set the value according to
your signal to avoid saturation.
Remote command:
POWer:INRush:MAXCurrent
on page 2530
Trigger current value (T)
Sets the current value for the trigger. The measurement starts after the signal of the
DUT reaches this current value.
Remote command:
POWer:INRush:TRIGger
on page 2530
Gate Configuration
In this table, you can configure different gates (time periods). You can configure up to
five different gates. The time periods of the defined gates may overlap.
To add a gate press "Insert" or"Append". To remove a gate press "Remove".
Remote command:
POWer:INRush:ADD
on page 2529
POWer:INRush:INSert
on page 2529
POWer:INRush:REMove
on page 2529
Inrush current ← Gate Configuration
Shows the index of the gate.
Input