manualshive.com logo in svg

R&S RTO6, User Manual

Share
Download
R&S RTO6 User Manual Download Page 359

Measurements

R&S

®

RTO6

359

User Manual 1801.6687.02 ─ 05

2. Activate the measurement group.

3. Select the "Result Analysis" tab.

4. Enable the track.

See also: 

"Enable (Track)"

 

on page 361.

8.2.12.5

 

Settings for result analysis

The settings in the "Result Analysis" tab activate and configure long-term measure-
ments, statistical calculations, and the histogram of measurement results over a longer
period of time.

For scaling settings of the long-term diagram, see 

Chapter 8.2.12.6, "Horizontal long-

term scaling"

, 

on page 362.

Measurement for plot

Selects the measurement that is used as source for mathematic calculations, long-term
measurements, and histograms. These evaluations are performed on one measure-
ment only, not on all measurements of the group. Statistics are calculated for all mea-
surements.

The selected measurement cannot be disabled in the "Add / Remove Measurement"
dialog box.

Automatic measurements

Summary of Contents for RTO6






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands