Remote control commands
R&S
®
RTO6
2308
User Manual 1801.6687.02 ─ 05
SEARch:TRIGger:MPHY:DATA:IMAX
<SearchName>,<DataIndexMax>
SEARch:TRIGger:MPHY:DATA:IMAX?
<SearchName>
Sets the end value of the index range if
is set to
INRange
or
RANge
.
Parameters:
<DataIndexMax>
Range:
1 to 0
Increment: 1
*RST:
0
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:FSNumber:CONDition
<SearchName>,<FSNOperator>
SEARch:TRIGger:MPHY:FSNumber:CONDition?
<SearchName>
Sets the condition for FSN. You can define an exact value or a value range.
Parameters:
<FSNOperator>
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one data pattern
to be set with the corresponding
INRange | OORange
In range/Out of range: set the minimum and maximum value of
the range with
SEARch:TRIGger:MPHY:FSNumber:MIN
and
SEARch:TRIGger:MPHY:FSNumber:MAX
*RST:
EQUal
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:FSNumber:MIN
<SearchName>,<FSNMin>
SEARch:TRIGger:MPHY:FSNumber:MIN?
<SearchName>
Specifies the FSN bit pattern, or sets the start value of a pattern range.
Parameters:
<FSNMin>
Numeric or string pattern, see
on page 1286. The string parameter accepts the bit
value X (don't care).
Parameters for setting and query:
<SearchName>
Protocols