R&S RTO6, User Manual

Page: 80 / 2677

Instrument setup
R&S
®
RTO6
80 User Manual 1801.6687.02 ─ 05
Show tabs always
If selected, the tab titles of all diagrams are displayed: "Diagram1", "Diagram2" ...
If cleared, the tab titles are not shown except for titles in a tabbed diagram. In tabbed
diagrams, the tab titles are required to change the tabs.
Remote command:
DISPlay:DIAGram:TITLe
on page 1306
Show signal bar
If enabled, the signal bar is displayed on the right of the diagram area.
Remote command:
DISPlay:SIGBar[:STATe]
on page 1306
Show date / time
If enabled, the date and time are shown near to the Rohde & Schwarz logo at the
upper right corner of the screen.
Evaluation gate in zoom
If enabled, the available histogram areas, masks, and measurement gates are shown
in the zoom diagrams. If the evaluation gate is within the zoom area, the display helps
to move or modify the evaluation gates in the zoom window.
Make sure that the option is disabled if the zoom area and the evaluation gate are of
nearly the same size to avoid conflicts in operation.
Appearance settings