R&S RTO6, User Manual

Page: 464 / 2677

Data and file management
R&S
®
RTO6
464 User Manual 1801.6687.02 ─ 05
<value 1>
<value 2>
<...>
You can also select the format of the time stamp in the "Acquire" > "History" dialog.
Remote command:
EXPort:WAVeform:TIMestamps
on page 1654
Multiple acquisitions in one file
If enabled, allows you to save several or all history waveforms. Define the part of the
history to be exported using "Start acquisition" and "Stop acquisition".
If multiple acquisitions of one waveform are exported into a BIN file, the first acquisition
can be reloaded as reference waveform.
Remote command:
CHANnel<m>[:WAVeform<n>]:HISTory:STARt
on page 1462
CHANnel<m>[:WAVeform<n>]:HISTory:STOP
on page 1462
Start export
Starts the history replay and simultaneous saving.
Remote command:
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY
on page 1463
Save to file
Enter the filename to save the waveform to. Double-tap the filename to open the file
selection dialog box.
By default, the filename has the prefix "RefCurves_". You can define a pattern for auto-
matic naming in the "Autonaming" dialog, see
Chapter 4.8.1, "Autonaming" ,
on page 104.
"Save" Saves the waveform as a reference waveform in the selected file.
"Save As..." Opens the file selection dialog box and saves the waveform to the
selected file. See also
Chapter 12.5, "File selection dialog" ,
on page 482
".bin/.xml/.csv" Selects the file format. Note that reference waveforms can be loaded
from
.bin
files only.
See also: Chapter 12.2.1, "Waveform export files" , on page 453.
Remote command:
EXPort:WAVeform:NAME
on page 1651
EXPort:WAVeform:SAVE
on page 1651
12.2.2.3 Waveform logger settings
Access: "Menu" key >"Save/Recall" key > "Save" tab > "Waveform" > "Logger" tab.
Save and recall waveform data and results