I/Q software interface (Option R&S
RTO6-K11)
R&S
®
RTO6
1062
User Manual 1801.6687.02 ─ 05
–
The input signal is filtered and resampled to the sample rate of the output I/Q
signal.
–
Two input channels are required for each input signal, one for the in-phase
component, and one for the quadrature component. Thus up to two complex
input signals can be recorded in parallel.
●
Complex I/Q signals in low IF range
–
The input signal is down-converted, filtered and resampled to the sample rate
of the output I/Q signal.
–
Two input channels are required for each input signal, one for the in-phase
component, and one for the quadrature component. Thus up to two complex
input signals can be recorded in parallel.
–
Remote command:
Rel. BW, Filter BW
"Rel. BW" sets the bandwidth factor to define the filter bandwidth:
Filter BW = Relative BW * Sample rate
Remote command:
I/Q sampling setup
