R&S RTO6, User Manual

Page: 1806 / 2677

Remote control commands
R&S
®
RTO6
1806 User Manual 1801.6687.02 ─ 05
TRIGger<m>:CAN:NDBYtes?
Returns the number of data bytes defined by DLC. DLC and NDB are different in CAN
FD for DLCs
> 8.
See also: "Data setup: DLC, NDB, Transfer, Condition, Data min, Data max"
on page 591.
Return values:
<NDBytes> Range: 1 to 64
Increment: 1
*RST:
1
Usage: Query only
TRIGger<m>:CAN:FDATa:DPOPerator <DataPosOperator>
Sets the operator to define an exact position or a data range where the instrument
looks for the specified data pattern.
The setting is available in CAN FD option.
The position can be defined if the data field of the frame is longer than 8 bytes - if
TRIGger<m>:CAN:DLC
≥
9.
Parameters:
<DataPosOperator> ANY | OFF | EQUal | GETHan | INRange | RANGe
ANY = OFF
The data position is not relevant for the trigger condition.
EQUal | GETHan
Equal, Greater or equal than. These conditions require one data
position to be set with
TRIGger<m>:CAN:FDATa:DPOSition
.
INRange = RANGe
In range: Set the minimum and maximum value of the range with
TRIGger<m>:CAN:FDATa:DPOSition
and
TRIGger<m>:
CAN:FDATa:DPTO
.
*RST: ANY
TRIGger<m>:CAN:FDATa:DPOSition <DataPosition>
Defines the number of the first data byte at which the data pattern may start.
The setting is available in CAN FD option.
Parameters:
<DataPosition> Range: 1 to 57
Increment: 1
*RST:
1
Protocols