manualshive.com logo in svg

R&S RTO6, User Manual

Share
Download
R&S RTO6 User Manual Download Page 1234

Network operation and remote control

R&S

®

RTO6

1234

User Manual 1801.6687.02 ─ 05

The instrument home page displays the device information required by the LAN stan-
dard including the VISA resource string in read-only format.

► To update the "Host Name", press the "Device Indicator" button. The "Device Indi-

cator" is not password-protected.

The most important items in the navigation menu of the browser interface are the fol-
lowing:

●

"LAN Configuration" opens the menu with configuration pages.

●

"Utilities > Logging" shows log messages and provides buttons to download or
clear the logfile.

●

"Web Control" emulates the front panel and shows the instrument display. You see
a live image of the instrument, and you can operate the instrument remotely. You
can use the keys, the knobs and the menus in the same way as directly on the
instrument.

●

"Device Screenshot": creates a screenshot of the display.

●

"Health & Utilization": not yet supported

●

"Help" provides a glossary of terms related to the standard, and a link to the
Rohde

 

&

 

Schwarz Internet site.

22.3.2.1

 

LAN configuration

The LAN configuration consists of three parts:

●

"IP configuration" provides all mandatory LAN parameters.

●

"Advanced LAN Configuration" provides LAN settings that are not declared manda-
tory by the standard.

Web interface

Summary of Contents for RTO6






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands