R&S RTO6, User Manual

Page: 1162 / 2677

Power analysis (option R&S RTO6-K31)
R&S
®
RTO6
1162 User Manual 1801.6687.02 ─ 05
12. Tap "Execute".
On the screen you can see the measurement waveforms of the slew rate, the cur-
rent and the voltage. The result box with numeric measurement results is shown.
For details, see
Chapter 19.4.3.1, "Slew rate results" , on page 1160.
19.4.3.3 Slew rate settings
In the "Channels" tab, you set the current source and the voltage source, see also:
Chapter 19.2.1, "Channels tab" , on page 1134.
In the "Settings" tab, you configure the slew rate measurement parameters and display
settings.
Source
Selects dV/dt or dI/dt as the source of the measurement.
Remote command:
POWer:SLEWrate:SOURce
on page 2537
Control loop