Remote control commands
R&S
®
RTO6
1984
User Manual 1801.6687.02 ─ 05
Parameters:
<BitRateMode>
HIGH | LOW
*RST:
HIGH
BUS<m>:ARINc:MAXGap:SELect
<MaxGapSelect>
Enables the detection of the maximum gap time during decoding.
To specify the minimum gap time
Suffix:
<m>
.
1..4
Parameters:
<MaxGapSelect>
ON | OFF
*RST:
OFF
BUS<m>:ARINc:MAXGap:BITS
<MaxGapBits>
Sets the value for the maximum gap between two words.
See also:
Suffix:
<m>
.
1..4
Parameters:
<MaxGapBits>
Range:
0 to 1000
Increment: 1
*RST:
100
Default unit: bit
BUS<m>:ARINc:MINGap:SELect
<MinGapSelect>
Enables the detection of the minimum idle time between two words during decoding.
To specify the minimum gap, use
Suffix:
<m>
.
1..4
Parameters:
<MinGapSelect>
ON | OFF
*RST:
ON
BUS<m>:ARINc:MINGap:BITS
<MinGapBits>
Sets a value for the minimum timing gap between two words.
See also:
Suffix:
<m>
.
1..4
Protocols
