Remote control commands
R&S
®
RTO6
1877
User Manual 1801.6687.02 ─ 05
Parameters:
<DataPatternTo>
Numeric or string pattern, see
on page 1286. The string parameter accepts the bit
value X (don't care).
TRIGger<m>:FLXRay:SYMBol
<Symbol>
Triggers on a symbol or on a wakeup pattern.
Parameters:
<Symbol>
CASMts | WAKeup
CASMts
Collision Avoidance Symbol / Media access Test Symbol. These
symbols are identical and can be sent in the optional symbol
window at the end of a communication cycle. They are used to
avoid collisions during the system start.
WAKeup
The wakeup pattern is sent to activate the nodes of the system.
*RST:
CASMts
TRIGger<m>:FLXRay:BSSerror
<BSSError>
Triggers on error in SyteStart Sequence. The BSS is transmitted before each byte.
Parameters:
<BSSError>
ON | OFF
*RST:
ON
TRIGger<m>:FLXRay:FESerror
<FESError>
Triggers on error in Frame End Sequence. FES indicates the end of each frame.
Parameters:
<FESError>
ON | OFF
*RST:
ON
TRIGger<m>:FLXRay:FSSerror
<FSSError>
Triggers on Error in a Frame Start Sequence. FSS follows the Transmission Start
Sequence TSS at the beginning of each frame.
Parameters:
<FSSError>
ON | OFF
*RST:
ON
Protocols
