Remote control commands
R&S
®
RTO6
1590
User Manual 1801.6687.02 ─ 05
<MaskSegmIdx>
Number of the segment. Counting starts from 0.
Usage:
Query only
MTESt:SEGMent:POINt:X
<MaskTestName>, <MaskSegmIdx>,
<MaskSegmPtIdx>,<X>
MTESt:SEGMent:POINt:X?
<MaskTestName>, <MaskSegmIdx>, <MaskSegmPtIdx>
Defines the x-value of the mask segment point.
Parameters:
<X>
Range:
-100E+24 to 100E+24
Increment: 1E-6
*RST:
0
Default unit: s
Parameters for setting and query:
<MaskTestName>
String with the name of the mask test
<MaskSegmIdx>
Number of the segment. Counting starts from 0.
<MaskSegmPtIdx>
Number of the point. Counting starts from 0.
Example:
See
Chapter 24.3.3.1, "Creating a user mask"
Usage:
Asynchronous command
MTESt:SEGMent:POINt:Y
<MaskTestName>, <MaskSegmIdx>,
<MaskSegmPtIdx>,<Y>
MTESt:SEGMent:POINt:Y?
<MaskTestName>, <MaskSegmIdx>, <MaskSegmPtIdx>
Defines the y-value of the mask segment point.
Parameters:
<Y>
Range:
-100E+24 to 100E+24
Increment: 1E-6
*RST:
0
Default unit: V
Parameters for setting and query:
<MaskTestName>
String with the name of the mask test
<MaskSegmIdx>
Number of the segment. Counting starts from 0.
<MaskSegmPtIdx>
Number of the point. Counting starts from 0.
Example:
See
Chapter 24.3.3.1, "Creating a user mask"
Usage:
Asynchronous command
MTESt:SEGMent:RESCale:RECalculate
<MaskTestName>, <MaskSegmIdx>
Multiplies and adds the given x- and y-factors and offsets to the coordinates of all
points of the selected mask segment.
Mask testing
