Getting started
R&S
®
RTO6
59
User Manual 1801.6687.02 ─ 05
●
In a minimized view (result icon) on the signal bar
●
In a separate tab that can be arranged similar to a diagram
The default position and the font size can be adjusted.
To define the default position of measurement results
For results of automatic, cursor and protocol measurements and for decode results,
the docked table below the diagram is the initial default position.
To change the default position of the results:
► Open the "Menu" > "Settings" > "Appearance" dialog.
● Automatic measurements: select "Measurement" tab > "Result position".
● Cursor measurements: select "Cursor" tab > "Result position".
● Protocols: select "Protocol" tab > "Result position".
Mask test and search results are always shown in a floating result box, which you can
drag to a convenient position using the SmartGrid.
To arrange the results on the display
1. If the results are listed in a docked table, touch and hold a result line and drag it.
The results are now shown in a floating result box.
Note:
Once you undock the measurement results, you cannot move the result box
back to the docked position.
2. Touch and hold the title of the result box and drag the box on the screen. The
SmartGrid indicates where the result box will be placed.
● If you drop the box on one of the buttons, the results are shown in a separate
tab besides, above, or below the diagram.
● If you drop the box on the signal bar, a result icon is created.
● If you drop the box somewhere else, the floating result box is placed there.
Operating the instrument
