Remote control commands
R&S
®
RTO6
1687
User Manual 1801.6687.02 ─ 05
BUS<m>:I2C:FRAMe<n>:ADDRess?
Returns the device address value of the indicated frame, that is, the address value that
is shown in the decoded cells and in the decode results table.
If the frame has a 7-bit address, the command considers the status of
. If
BUS<m>:I2C:RWBit INADdress
is set, the returned address includes the
R/W bit (8 bit). Otherwise, the pure address without the R/W bit is returned (7 bit, same
result as returned with
Suffix:
<m>
.
1..4
Selects the serial bus.
<n>
*
Selects the frame.
Return values:
<AddressValue>
.
The values below
–
range, increment and default
–
are decimal
values.
Range:
0 to 1023
*RST:
0
Usage:
Query only
BUS<m>:I2C:FRAMe<n>:ADEVice?
Returns the pure device address of the indicated frame
without
the R/W bit.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n>
*
Selects the frame.
Return values:
<DeviceAddress>
.
The values below
–
range, increment and default
–
are decimal
values.
Range:
0 to 1023
*RST:
0
Usage:
Query only
BUS<m>:I2C:FRAMe<n>:AMODe?
Returns the address length.
Suffix:
<m>
.
1..4
Selects the serial bus.
Protocols
