R&S RTO6, User Manual

Page: 1840 / 2677

Remote control commands
R&S
®
RTO6
1840 User Manual 1801.6687.02 ─ 05
SYNC
Start of the frame, triggers on the stop bit of the sync field.
ID
Sets the trigger to one specific identifier or an identifier range.
To set the identifier, use
TRIGger<m>:LIN:ICONdition
,
TRIGger<m>:LIN:IMIN
on page 1841, and
TRIGger<m>:
LIN:IMAX
on page 1841.
IDOR
Triggers on an OR combination with up to four identifier condi-
tions. For each identifier condition, enable it with
TRIGger<m>:
LIN:IDOR<n>:ENABle
and set the value with
TRIGger<m>:
LIN:IDOR<n>[:VALue]
IDDT
Combination of identifier and data conditions
To set the identifier condition, use
TRIGger<m>:LIN:
ICONdition
,
TRIGger<m>:LIN:IMIN
, and
TRIGger<m>:
LIN:IMAX
.
To set the data condition, use
TRIGger<m>:LIN:DCONdition
,
TRIGger<m>:LIN:DMIN
, and
TRIGger<m>:LIN:DMAX
.
WKFR
Wakeup frame
ERRC
Error condition. Define the error types with
TRIGger<m>:LIN:
CHKSerror
on page 1844,
TRIGger<m>:LIN:IPERror
, and
TRIGger<m>:LIN:SYERror
*RST: SYNC
TRIGger<m>:LIN:ICONdition <IdOperator>
Sets the operator to set a specific identifier or an identifier range.
Parameters:
<IdOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These condition require one identifier pat-
tern to be set with
TRIGger<m>:LIN:IMIN
INRange | OORange
In range / Out of range: Set the minimum and maximum value of
the range with
TRIGger<m>:LIN:IMIN
and
TRIGger<m>:
LIN:IMAX
*RST: EQUal
Protocols