R&S RTO6, User Manual

Page: 1401 / 2677

Remote control commands
R&S
®
RTO6
1401 User Manual 1801.6687.02 ─ 05
HIGH
The signal level stays above the trigger level.
LOW
The signal level stays below the trigger level.
EITHer
The signal level stays above or below the trigger level.
*RST:
HIGH
Usage: Asynchronous command
TRIGger<m>:TIMeout:TIME <Time>
Defines the time limit for the timeout at which the instrument triggers.
Suffix:
<m>
.
1..3
1 = A-trigger, 2 = B-trigger, 3 = R-trigger
Parameters:
<Time> Range: 100E-12 to 10000
Increment: 100E-9
*RST:
100E-9
Default unit: s
Usage: Asynchronous command
24.9.8 Interval trigger
TRIGger<m>:INTerval:SLOPe
....................................................................................... 1401
TRIGger<m>:INTerval:RANGe
.......................................................................................1402
TRIGger<m>:INTerval:WIDTh
........................................................................................1402
TRIGger<m>:INTerval:DELTa
........................................................................................ 1402
TRIGger<m>:INTerval:SLOPe <Slope>
Sets the edge for the trigger. You can analyze the interval between positive edges or
between negative edges.
Suffix:
<m>
.
1..3
1 = A-trigger, 2 = B-trigger, 3 = R-trigger
Parameters:
<Slope> POSitive | NEGative
See
Chapter 24.4.3, "Slope parameter" , on page 1285.
*RST: POSitive
Usage: Asynchronous command
Trigger