Protocol analysis
R&S
®
RTO6
711
User Manual 1801.6687.02 ─ 05
The color-coding of the various protocol sections and errors simplifies the interpretation
of the visual display. The decode information condenses or expands, depending on the
horizontal scale. Various data formats are available to show the result values.
Decode Results Table
The "Decode results" table contains information about all decoded frames.
Table 13-19: Content of the Decode results table
Column
Description
State
Overall state of the frame.
Start
Time of word start in relation to the trigger point
Stop
Time of word stop in relation to the trigger point
Label
The value of the label bytes
SDI
The state of the SDI bits
DATA
All 32 bits of the word.
SSM
The state of the SSM bits
Label Name
The label name
Data (32 bit)
The value of the data bytes
Tools
Press "Display settings" in the "Decode Results" table to access the "Display" tab.
Remote commands
Remote commands are described in
Chapter 24.17.14.3, "Decode results"
13.13.5
Search on decoded ARINC 429 data
Using the search functionality, you can find various events in the decoded data, the
same events which you also can trigger on. Before you can start the search, you have
to configure the bus correctly and acquire decoded data.
To search on decoded data, set the search "Source" to the serial bus that is configured
for the protocol to be analyzed.
ARINC 429 (option R&S
RTO6-K530)
