R&S RTO6, User Manual

Page: 286 / 2677

Measurements
R&S
®
RTO6
286 User Manual 1801.6687.02 ─ 05
● Starting a simple cursor measurement ................................................................. 286
● Configuring a cursor measurement .......................................................................286
● Configuring the cursor display ...............................................................................288
● Saving measurement results to file .......................................................................288
8.1.2.1 Starting a simple cursor measurement
To display cursors using the toolbar
1. Tap the "Cursor" icon on the toolbar.
2. Tap the waveform that you want to measure. Alternatively, you can draw a rectan-
gle in the diagram to position the cursor lines.
The cursor lines appear and the cursor results are displayed in a table or result
box.
To display cursors using the [Cursor] key
1. Select the waveform that you want to measure.
2. Press the [Cursor] key.
The cursor lines and the measurement results are displayed.
To disable one cursor measurement
1. Tap the "Delete" icon on the toolbar.
2. Tap a cursor line.
The cursor set and its measurement results are deleted.
To disable all cursor measurements
1. Tap the "Delete" icon on the toolbar.
2. Tap the results table.
All cursor sets and measurement results are deleted.
8.1.2.2 Configuring a cursor measurement
To modify the position of the cursor lines, you can drag the lines on the screen. In addi-
tion, various settings are possible to refine the measurement.
The complete configuration of cursor measurements is provided in the "Cursors" dia-
log.
1. To open the "Cursors" dialog, use one of these ways:
● Open the "Menu", and select "Cursor".
Cursor measurements