Protocol analysis
R&S
®
RTO6
699
User Manual 1801.6687.02 ─ 05
To search on decoded data, set the search "Source" to the serial bus that is configured
for the protocol to be analyzed.
See also
Chapter 11, "Search functions"
13.12.5.1
MIL search setup
Access: [Bus] > "Shortcuts" tab > "Setup search"
Type
The search criterion is defined by "Type". All trigger types are also available for search.
Additional search parameters are provided under "Detailed Search Parameter Setup".
"Sync"
Searches for a sync impulse.
"Word"
Searches for the selected word type.
"Data Word"
Searches for the specified data word. Additional search parameters:
remote terminal address, data pattern and data index.
"Command /
Status Word"
Searches for command or status words. Additional search parame-
ters: remote terminal address, and 11-bit information.
"Command
Word"
Searches for a command word. Additional search parameters: remote
terminal address, subaddress / mode, and data word count / mode
code.
"Status Word"
Searches for a status word. Additional search parameters: remote
terminal address, and status flags.
"Error condition"
Identifies various errors in the frame, see
Remote command:
Sync Type / Word Type
Searches for a sync impulse/ word type. You can search for "Command/Status", "All"
or "Data" sync pulses/ word types.
Remote command:
SEARch:TRIGger:MILStd:TPSPecifier
MIL-1553 (option R&S
RTO6-K530)
