Jitter analysis and clock data recovery
R&S
®
RTO6
1091
User Manual 1801.6687.02 ─ 05
Statistics
Enables the calculation and display of statistical results. They include:
●
"Min (abs/pp)": absolute minimum value of the component.
●
"Max (abs /pp)": absolute maximum value of the component.
●
"Min (
σ
)": minimum value of the standard deviation.
●
"Max (
σ
)": maximum value of the standard deviation.
●
"Wave count": Number of waveforms (acquisitions) the measurement is based on.
In the "Advanced Jitter Results" table, you can reset the statistics.
Remote command:
ADVJitter<m>:RESult:STATistics
Step response
Enables a step response diagram. The diagram displays the time behavior of the sys-
tem when the inputs change from zero to one or from one to zero within a short time
period.
for the step response diagram in the
"Advanced Settings" dialog.
For further analysis of the step response, you can use it as a source for "Amp/Time"
measurements. See
Chapter 8.2.5, "Amplitude/time measurements"
Remote command:
ADVJitter<m>:RESult:STEPresponse
Component specific results
For the selected jitter component, selected you can display:
●
"Histogram": displays a histogram of measurement results for the selected compo-
nent - the cumulative occurrence distribution of measurement results in a graphic.
You can enable a cursor and use it for further analysis.
Advanced jitter and noise (option R&S
RTO6- K133/K134)
