R&S RTO6, User Manual

Page: 631 / 2677

Protocol analysis
R&S
®
RTO6
631 User Manual 1801.6687.02 ─ 05
Select Search Types
Selects one criterion or an AND-combination of criteria to be searched for. If more than
one criterion is selected, all criteria must be fulfilled by a frame for it to be shown in the
search results.
"Start of frame" Searches for the first rising edge after the transmission start
sequence (TSS).
"Idedata"
Searches for the decoded frame content, on header and payload
data:
●
Indicator bits, see "Indicator bits" on page 631
●
Frame identifier, see "Frame ID (min/max)" on page 632
●
Payload length, see "Payload length (min/max)" on page 632
●
Cycle count, see "Cycle count (min, max), Step" on page 632
●
Data position, see "Position, Index (min, max) - Data setup"
on page 633
●
Data bit pattern, see "Condition, Data (min, max) - Data setup"
on page 633
"Symbol" Searches for a symbol or wakeup pattern, see "Symbol"
on page 633.
"Error condition"
Searches for one or more errors that are detected in the decoded
data, see
"Error Condition" on page 633.
Remote command:
SEARch:TRIGger:FLXRay[:SSOFrame]
on page 1885
SEARch:TRIGger:FLXRay:SSYMbol
on page 1885
SEARch:TRIGger:FLXRay:SIDData
on page 1885
SEARch:TRIGger:FLXRay:SERRor
on page 1884
Indicator bits
Searches for one or more indicator bits at the beginning of the header segment. Each
bit can be set to 0, 1, or X (do not care).
FlexRay (option R&S RTO6-K520)