Mask testing
R&S
®
RTO6
412
User Manual 1801.6687.02 ─ 05
3. Tap "Finish segment".
Now you can enter another segment to the current mask test or add a new mask
test.
4. To finish the mask definition, close the overlay menu.
If the acquisition is running, the mask test starts automatically and immediately.
To create a mask numerically in the dialog box
The settings mentioned here are described in detail in
1. Open [App Cockpit] > "Analysis" tab > "Mask" > "Define Mask" tab.
2. Create a mask test:
a) Tap the "+"-icon in the upper right corner.
b) Enter a name for the new mask test.
A new, empty tab for the mask test appears.
3. Set "Mask type"= "User".
4. Tap "Setup mask".
5. In the "User Mask: Segments" area, tap "Insert" to create a new mask segment.
6. Set the corner points of the mask segment:
a) Select the "Segment".
b) Tap "Configure". The "User Mask: Points" dialog opens.
c) In the "Definition of segment" area, tap "Insert".
Point 1 appears.
d) Tap the X-cell and enter the X-value of the point.
e) Tap the Y-cell and enter the Y-value of the point.
f) To insert the next point:
● Tap "Insert" to add a point before the selected point.
● Tap "Append" to add a point at the end of the list.
g) Set the X- and Y-values for this point.
h) Repeat the last two steps until you define all points.
7. In the "Define Mask" tab, tap "Enable".
8. Adjust the horizontal and vertical units if necessary.
10.4.1.2
Modifying user masks
To change an existing mask definition, you can also use the graphical method on the
touch screen, or the numerical way, or combine both.
With the graphical method, you can:
●
Move, add, and delete segments
●
Move and delete points
Working with masks
