Remote control commands
R&S
®
RTO6
1958
User Manual 1801.6687.02 ─ 05
Parameters:
<MaxResponseTime> Range:
2E-6 to 262E-6
Increment: 100E-9
*RST:
14E-6
Default unit: s
BUS<m>:MILStd:MAXResponse:SELect
<MaxRespSel>
Enables the detection of the maximum response time between the last bit of a word
and the following status word sync during decoding.
To specify the maximum response time, use
BUS<m>:MILStd:MAXResponse:BITS
Suffix:
<m>
.
1..4
Parameters:
<MaxRespSelect>
ON | OFF
*RST:
ON
BUS<m>:MILStd:MINGap:SELect
<MinGapSelect>
Enables the detection of the minimum idle time between the last bit of a message and
the following command word sync during decoding.
To specify the minimum gap, use
Suffix:
<m>
.
1..4
Parameters:
<MinGapSelect>
ON | OFF
*RST:
ON
BUS<m>:MILStd:MINGap:BITS
<MinGapTime>
Sets a value for the minimum gap.
See also:
Suffix:
<m>
.
1..4
Parameters:
<MinGapTime>
Range:
2E-6 to 262E-6
Increment: 100E-9
*RST:
4E-6
Default unit: s
Protocols
