R&S RTO6, User Manual

Page: 1963 / 2677

Remote control commands
R&S
®
RTO6
1963 User Manual 1801.6687.02 ─ 05
INRange | OORange
In range/Out of range: Set the minimum and maximum value of
the range with
TRIGger<m>:MILStd:CMD:CMIN
and
TRIGger<m>:MILStd:CMD:CMAX
.
*RST: EQUal
TRIGger<m>:MILStd:CMD:CMAX <WordCntPattMax>
Sets the end value of a data word count/mode code pattern if
TRIGger<m>:MILStd:
CMD:CCONdition
is set to
INRange
or
OORange
.
Parameters:
<WordCntPattMax> Numeric or string pattern, see Chapter 24.4.6, "Bit pattern
parameter" , on page 1286. The string parameter accepts the bit
value X (don't care).
TRIGger<m>:MILStd:CMD:CMIN <WordCntPattMin>
Specifies a data word count/mode code pattern or sets the the start value of a pattern
range.
Parameters:
<WordCntPattMin> Numeric or string pattern, see Chapter 24.4.6, "Bit pattern
parameter" , on page 1286. The string parameter accepts the bit
value X (don't care).
TRIGger<m>:MILStd:CMD:SCONdition <SubaddrOperator>
Sets the operator to set a specific subaddress/mode pattern.
Parameters:
<SubaddrOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one pattern to
be set with
TRIGger<m>:MILStd:CMD:SMIN
.
INRange | OORange
In range/Out of range: set the minimum and maximum value of
the range with
TRIGger<m>:MILStd:CMD:SMIN
and
TRIGger<m>:MILStd:CMD:SMAX
.
*RST: EQUal
TRIGger<m>:MILStd:CMD:SMAX <SubaddrPattMax>
Sets the end value of the subaddress range if
TRIGger<m>:MILStd:CMD:
SCONdition
is set to
INRange
or
OORange
.
Protocols