Remote control commands
R&S
®
RTO6
1939
User Manual 1801.6687.02 ─ 05
Suffix:
<m>
.
1..3
Parameters:
<ErrorLength>
ON | OFF
*RST:
ON
TRIGger<m>:CXPI:ERRor:PARity
<ErrorParity>
Triggers on a parity error indicating a transmission error, if
is set to
ERRor
.
Suffix:
<m>
.
1..3
Parameters:
<ErrorParity>
ON | OFF
*RST:
ON
TRIGger<m>:CXPI:ERRor:UART
<ErrorUart>
Triggers on an UART error, if
is set to
ERRor
.
Suffix:
<m>
.
1..3
Parameters:
<ErrorUart>
ON | OFF
*RST:
ON
TRIGger<m>:CXPI:FID:CONDition
<FrameIDOperator>
Set the condition for the frame ID. You can define an exact value or a value range.
Suffix:
<m>
.
1..3
Parameters:
<FrameIDOperator> EQUal | NEQual | LTHan | LETHan | GTHan | GETHan |
INRange | OORange
EQUal | NEQual | LTHan | LETHan | GTHan | GETHan
Equal, Not equal, Less than, Less or equal than, Greater Than,
Greater or equal than. These conditions require one data pattern
to be set with the corresponding
command.
INRange | OORange
In range/Out of range: set the minimum and maximum value of
the range with
and
*RST:
EQUal
Protocols
