Power analysis (option R&S
RTO6-K31)
R&S
®
RTO6
1141
User Manual 1801.6687.02 ─ 05
6. Select the correct channels of the "Current Source" and the "Voltage Source".
7. Select the "Settings" tab.
8. Set the "Input frequency" according to your signal.
9. Select an "Optimize Scaling" option.
10. Tap "Execute".
On the screen you can see the measurement waveforms of the current, the voltage
and the power. Also, the result box with numeric measurement results is shown.
For details, see
Chapter 19.3.1.1, "Power quality results"
19.3.1.3
Power quality settings
In the "Channels" tab, you set the current source and the voltage source, see also:
Chapter 19.2.1, "Channels tab"
In the "Settings" tab, you configure the power measurement parameters and display
settings.
Input frequency
Selects the input frequency of the source signal.
Remote command:
Input