Mask testing
R&S
®
RTO6
415
User Manual 1801.6687.02 ─ 05
e) To move the selected point, change the X- and Y-values.
To rescale and move a mask segment
The settings mentioned here are described in detail in
1. Open [App Cockpit] > "Analysis" tab > "Mask" > "Define Mask".
2. At the top, select the mask test for which you want to change the mask definition.
3. Tap "Setup mask" and select the required segment in the "User Mask: Segments"
table.
4. Tap "Configure".
5. To stretch or compress the selected mask segment, enter the "Factor X" for hori-
zontal scaling and the "Factor Y" for vertical scaling. The x-values and y-values of
all points are multiplied with the corresponding factor. Factors >1 stretch the mask
segment, while factors between 0 and 1 compress it. Negative values are possible
and change the algebraic sign.
6. To move the selected mask segment, enter the "Offset X" for horizontal direction
and the "Offset Y" for vertical direction. The specified offset is added to the corre-
sponding values of all points.
7. Tap "Apply" to perform the scaling and/or move.
Working with masks