Remote control commands
R&S
®
RTO6
1463
User Manual 1801.6687.02 ─ 05
Parameters:
<StpAcqIdx>
Index of the stop acquisition. The newest acquisition always has
the index "0".
Range:
0 to -(n-1)
Increment: 1
Usage:
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TPACq
<TimePerAcq>
Sets the display time for one acquisition. The shorter the time, the faster is the replay.
Suffix:
<m>
.
1..4
Selects the input channel.
<n>
1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Parameters:
<TimePerAcq>
Range:
40E-6 to 10
Increment: 1
*RST:
0.05
Default unit: s
Usage:
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY
Starts and stops the replay of the history waveforms.
Suffix:
<m>
.
1..4
Selects the input channel.
<n>
1..3
Selects the waveform. If [:WAVeform<n>] is omitted, waveform 1
is adressed.
Usage:
Event
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay
<AutoRepeat>
If ON, the replay of the history waveform sequence repeats automatically. Otherwise,
the replay stops at the stop index set with
CHANnel<m>[:WAVeform<n>]:HISTory:
.
Suffix:
<m>
.
1..4
Selects the input channel.
Waveform analysis
