Beckman Coulter AU2700 Скачать руководство пользователя страница 359

Страница: 359 / 377

Automated Chemistry Analyzer

AU2700 User's Guide

Chapter D - Software

D-185

May, 2002

Use this software screen to:
Display periodic maintenance for a data list:

Records of previous periodic maintenance procedures can be referred to by selecting a

maintenance item. In the [Periodic Maintenance] screen, move the cursor to a consumable and

press function key F6 (history). Test names, execution intervals, the last ten execution dates, and

future dates will be displayed in a list.

Display the maintenance schedule:

Select function key F4 (grid display) to graphically display the maintenance schedule.

Keep a record of periodic maintenance:

1. Move the cursor to the maintenance procedure that was performed.
2. Select function key F5 (execute).

The "executed" date and "next" scheduled date will appear.

Note

The Photocal and W2 are automatically updated for the "executed" and "next" scheduled dates.

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды

Beckman Coulter AU2700, Руководство пользователя

Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды