Beckman Coulter AU2700, Руководство пользователя

Страница: 143 / 377

Automated Chemistry Analyzer
AU2700 User's Guide
Chapter C - Basic Operations
C-89
May, 2002
4.8 Saving Parameters and Data to a Floppy Disk
Caution
Floppy disks increase the potential of harmful viruses infecting the analyzer’s computer. To avoid
damage to the computer and the data, before loading or saving data to a floppy disk, always
perform a virus check on the floppy disk using any commercially available virus protection
software, to ensure the disk is free from harmful viruses.
How to Save or Load Parameters to a Floppy Disk
Prepare an initialized floppy disk:
Note
Initialize a 3.5 floppy disk as a parameters disk one time before parameters are saved or loaded. The
floppy disk can be 2HD or 2DD. Select [Maintenance], [Data Operation], [FD Data Management], FD
Data Initialize Tab. Select the “Initialize Parameter FD” option. Insert the floppy disk in the computer.
Select function key F5: Start Initialize. From the “Insert FD Start” prompt, select yes. The message
“Operating: Wait for a while” displays.
1. From the main menu select [Auxiliary], [Parameters Management].
2. Depending on your requirements, select either “Save Files to FD” or “Load Files from
FD.” The save files to FD option will save files on the computer hard drive to the floppy
disk. The load files from FD option will load files from the floppy disk onto the computer
hard drive. Loading files onto the computer hard drive writes over the existing files with
the same name.
Important
A safer option can also be used. When saving files to a floppy disk, files can be saved to the hard drive
by selecting the option called “Save files to HD.” This keeps the hard drive current in case the “Load
files from HD” option is accidentally selected.
3. Select one or more of the files in the “File” column by highlighting them with the mouse.
4. Insert the floppy disk in the computer. Select function key F5: Execute. From the “Insert
FD Start” prompt, select yes. The message “Operating: Wait for a while” displays.
How to Save Data to a Floppy Disk
Prepare an initialized floppy disk:
Note
Initialize a 3.5 floppy disk as a parameters disk one time before parameters are saved or loaded. The
floppy disk can be 2HD or 2DD. Select [Maintenance], [Data Operation], [FD Data Management],
FD Data Initialize Tab. Select the “Initialize Data FD” option. Insert the floppy disk in the computer.
Select function key F5: Start Initialize. From the “Insert FD, Start” prompt, select yes. The message
“Operating: Wait for a while” displays.
1. From the main menu select [Maintenance], [Data Operation], [FD Data Management].
The screen will default to the “FD Data Save” tab.
2. From the “Index” field, use the pull-down menu to select the index that will be saved.