Beckman Coulter AU2700 Скачать руководство пользователя страница 29

Страница: 29 / 377

A-16

Automated Chemistry Analyzer

AU2700 User's Guide

February, 2001

Analyzer Warning and Caution Labels

The following diagram shows alarm label locations and provides an explanation

of the symbols.

Alarm Label Outline

Alarm labels” are attached to analyzer parts requiring special safety considerations.

•

Please use the system safely and correctly according to the following instructions.

Do not remove the contents of “Alarm labels” carelessly, and do not damage or remove

•

“Alarm labels.”

Please contact the Beckman Coulter Technical Services if "Alarm labels” have become

•

illegible or if the labels have come off.

The contents of the “Alarm labels” are classified according to color.

•

Warning/Caution Labels pictograms

OLU4127

Electric shock warning (prevention against an electric shock)

Warning

Never remove the covers secured by screws, such as the rear cover and side covers, unless being

•

guided by an Beckman Coulter Representative.
If liquid spills or leaks occur inside the system, contact Beckman Coulter Technical Services.

•

Careless operation with liquid present may result in an electric shock.

OLU4128

Do not touch (prevention against injury)

Warning

While the system is operating, do not touch the moving parts. These include the sample probe,

•

reagent probes, mix bars, wash stations, and rack feed unit. Do not insert your finger or hand in

an opening.
To replace the photometer lamp, follow the procedures in “Chapter F, Maintenance.”

•

Do not touch the lamp before it is cool or you may be burned.
Observe the precautions on the analyzer labels and in this manual.

•

For information about precautions regarding the printer, refer to the operator's manual supplied

•

with the printer.

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды

Beckman Coulter AU2700, Руководство пользователя

Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды