Beckman Coulter AU2700 Скачать руководство пользователя страница 329

Страница: 329 / 377

Automated Chemistry Analyzer

AU2700 User's Guide

Chapter D - Software

D-155

February 4, 2004

Delete a menu item:

1. Move the cursor on the menu item and press function key F7 (delete).

A window to

confirm the deletion will be displayed.

2. Select “OK.”

The screen where the cursor is positioned will be deleted. Screens below

this line will be shifted up one line.

Modify a shortcut key or screen name:

Warning

Do not modify the software names unless instructed to do so by authorized Beckman Coulter personnel!

1. Move the cursor over a screen for which the shortcut key or name is to be modified, then

press function key F6 (change).

A window to modify shortcut keys and menu names will

be displayed.

Tips

To stop this operation, press cancel at any time.

The [User Menu] screen will be restored.

2. The cursor will appear in the “Title” field.

3. Enter 30 characters or less. Select "OK."
4. Select function key F2 (exit).

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Beckman Coulter AU2700, Руководство пользователя, Страница: 329 / 377

Результаты поиска

Содержание AU2700

Отзывы: