Beckman Coulter AU2700, Руководство пользователя

Страница: 181 / 377

Automated Chemistry Analyzer
AU2700 User's Guide
Chapter D - Software
D-7
May, 2002
1.2 Performing a W1, W2, or Photocal, and using the One
Touch Mode
Referring to the data
for samples under
analysis
F5
Referring to main
information on
system status
[System Status]
(4) Data
Display
Referring to the data
for all samples
Referring to the data
for ISE (option)
Referring to the data
for samples analyzed
with the STAT table
Select [All Data] tab
"Data Display" screen
Select [STAT Data] tab Select [ISE Data] tab
F6 F5
Referring to data
related to analyzed
smples
F5
OLU3013E
One of the tabs
can be selected
Button function
Described in
another section.
Press this key.
Main operation flow
Operation flow
ALARMCLEAR
? STANDBY
Help Exit
One
Touch
Photocal
Start
W2
Start
W1
Start
System Status
1997/09/03 10:10
(3)Cuvette Status
(6)DPR Status
(5)Alarm List
(4)Data Display
(7)STAT Table Status
(0)Reagent Status
Measure S.No.:
Online S.No.
Input
:
Output
:
Printer:
Bath Temp.:
REF.Coolant Temp.: C
C
STAT Cal./QC Status
Calibration:
QC:
OLU1011
(1)ISE Status
Reagent
Electrode
READY
R2
Status
R1 Status
Checked
(2)Analyzer Status
Description:
Perform a W1, W2, or Photocal according to the maintenance schedule located in the
Maintenance Chapter to ensure accurate analysis results. Use the [System Status] screen
to perform these functions. Also, if you want to use the one touch mode (which is an easy
operation mode for untrained operators) use the [System Status] screen to activate this function.
Use this software screen to:
Perform a W1:
For procedures, refer to the Maintenance Chapter, “Perform a W1.”
Perform a W2:
For procedures, refer to the Maintenance Chapter, “Perform a W2.”
Perform a Photocal:
For procedures, refer to the Maintenance Chapter, “Perform a Photocal.”
Shift to the One Touch Mode:
For procedures, refer to the Basic Operations Chapter “Using the STAT Table: One Touch
Mode.”