Beckman Coulter AU2700, Руководство пользователя

Страница: 130 / 377

C-76
Chapter C - Basic Operations
Automated Chemistry Analyzer
AU2700 User's Guide
May, 2002
4.3.2 How to Modify the Repeat Work List:
1. On the main screen, select [Routine], [Test Requisition] and [Repeat] in that order.
The screen for performing the requisition operation for repeat-run analysis is displayed.
OLP1035
ALARMCLEAR
?
1997/09/03 10:10
STANDBY
Repeat
S.No.:
Sample Dilution Rate:
999999999
Sex: Male Age: XXX
(Year/Month)
XX
0001 Type:
Test
Total(T)
Round No.:
Repeat S.No.:
S.ID.:
XXXXXXXXXXXXXXXXXXXX
XXXX
Renum
(N)
List of
Rep.(R)
Sample
Dil.(D)
Normal
Dilution
Cond.
Serum
Help Exit Start Entry Print S.No. Online
Change Test
Delete
Sample
2. Enter the original sample number of the sample for which the repeat run is to be
performed.
3. To select a sample type use the pull-down menu located by the box on screen.
4. Press function key F4 (start entry).
5. Select the test for which the repeat run is to be performed.
Tests that are selected will
appear in color. Normal = Dark Blue, Dilution = Light Blue, Cond. = Green. Tests
that are not selected will appear in light gray. It is possible to select several tests. Tests
already requisitioned can be selected to remove them from the requisition.
6. After selecting the test(s), press function key F4 (entry). If the repeat run is to be
performed using the STAT table, press function key F6 (STAT repeat). The settings will
be registered, and the screen will change to the next sample number.
7. Repeat the previous steps for all of the samples requiring a change in the repeat run
requisition.
8. After the requisition operation is performed, press function key F2 (exit). The main
screen returns.
9. Depending on the preferred repeat-run method, use one of the procedures on the
following pages. If changes are made to the repeat run requisitions, always print an
updated repeat run work list.