Beckman Coulter AU2700 Скачать руководство пользователя страница 158

Страница: 158 / 377

C-104

Chapter C - Basic Operations

Automated Chemistry Analyzer

AU2700 User's Guide

May, 2002

8. Repeat the previous steps for all emergency samples.
9. Set the sample container(s) with the emergency sample(s) into the red rack.

See Also

For information about how to place samples and racks, refer to “Preparing Samples and Racks”

located in this Chapter.

10. Set the red rack in the rack feeder.

Any white racks on the rack feeder unit can be

manually moved back, and the red rack placed in front for the next sample analysis.

11. Press start to begin or resume analysis.

See Also

For information on how to start analysis, refer to “Starting Analysis” located in this Chapter.

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Beckman Coulter AU2700, Руководство пользователя, Страница: 158 / 377

Результаты поиска

Содержание AU2700

Отзывы: