Beckman Coulter AU2700 Скачать руководство пользователя страница 162

Страница: 162 / 377

C-108

Chapter C - Basic Operations

Automated Chemistry Analyzer

AU2700 User's Guide

May, 2002

6.5 Stopping the Rack Feed Unit

Stopping the rack feed unit stops racks from being fed into the analyzer. When analysis

is started again, the system begins feeding the rack that was at the start of the rack feeder

when it was stopped. Use the stop rack feed function for such things as inserting an

emergency rack (red rack) for analysis.

Stopping the Rack feeder

1. Press the Feeder Stop function key or icon (>|) on the menu bar during the analysis

operation.

The window for stopping the feeder is displayed.

2. Select “Yes” and press enter.

A message indicating that the rack feeder is being stopped

is displayed. The analysis operation continues for racks that have already been fed from

the feeder, and stops at the rack at the start of the rack feeder.

Starting Analysis After the Rack Feeder Has Been Stopped

1. With the rack feeder stopped, perform the requisition operation in the same way as was

done for normal analysis.

See Also

For information about how to perform the requisition operation for normal analysis, refer to “Chapter C,

Starting Normal Analysis.”

2. Start analysis.

Analysis begins with the first rack in the rack feeder.

See Also

For information on how to start analysis, refer to Chapter C, “Starting Analysis.”

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды

Beckman Coulter AU2700, Руководство пользователя

Результаты поиска

Содержание AU2700

Отзывы:

Похожие инструкции для AU2700

Бренды по названию

Популярные бренды