Beckman Coulter AU2700 Скачать руководство пользователя страница 349

Страница: 349 / 377

Automated Chemistry Analyzer

AU2700 User's Guide

Chapter D - Software

D-175

May, 2002

Index:

Use the pull-down menu to select a different date and time.

Test Name:

Use the pull-down menu to select the test name.

Serum, Urine, Other, Routine, Emergency, STAT:

Select the sample type by clicking on the

check box next to the type.

Sample No.:

Set the sample number range within the numbers printed in parenthesis. To

specify all samples, enter an asterisk (*). To leave the field blank, enter a space.

Sample ID:

Set the sample ID range within the range specified in [Parameters], [Requisition

Format]. To specify all samples IDs, enter an asterisk (*). To leave the field blank, enter a

space.

Use this software screen to:
How to Save Data to a Floppy Disk

Prepare an initialized floppy disk:

Note

Initialize a 3.5 floppy disk as a parameters disk one time before parameters are saved or loaded. The

floppy disk can be 2HD or 2DD. Select [Maintenance], [Data Operation], [FD Data Management],

FD Data Initialize Tab. Select the “Initialize Data FD” option. Insert the floppy disk in the computer.

Select function key F5: Start Initialize. From the “Insert FD, Start” prompt, select yes. The message

“Operating: Wait for a while” displays.

1. From the main menu select [Maintenance], [Data Operation], [FD Data Management].

The screen will default to the “FD Data Save” tab.

2. From the “Index” field, use the pull-down menu to select the index that will be saved.

3. Place a check in the box by the sample type of your choice: Serum, urine, other, routine,

emergency, or STAT.

4. From the sample number field, enter the range of sample numbers to save, or leave the

asterisk (*) to save the entire range displayed. The samples can also be saved by entering

a range of sample ID numbers from the sample ID field.

5. Insert the floppy disk in the computer. Select function key F5: Start Save. From

the “Insert FD Start” prompt, select yes. The message “Operating: Wait for a while”

displays.

Содержание AU2700


























































































































































































































































































































































































Результаты поиска

Содержание AU2700

Отзывы:

Beckman Coulter AU2700, Руководство пользователя, Страница: 349 / 377

Результаты поиска

Содержание AU2700

Отзывы: